Description
This product can automate Doors, Gates, Windows and blinds. Easily retrofit, control and monitor the status of any motorised application from your smartphone.
Easy to install and set up
Our switch takes 30 minutes for retrofit install in a standard environment and is easy to configure. It works with your home wifi router and eliminates the need for any hardware dependency.
Installation
- Loosen the terminal screws and ensure adequate space to insert the stripped cable.
- Connect wires correctly as shown in the diagram and double-check all the connections carefully.
- Ensure bare wires are fully inserted into the terminal and there are no loose strands of wire.
- Terminals must be tightened adequately as per Australian Standards to ensure the wire doesn’t come out after installation.
- Ensure all the conductors are secured tightly by terminal screws.
Notes
- All installation work must be performed by a qualified electrician.
- Electrician must use junction box in exposed environment
- The Infinite DryContact Switch must be installed as per standard guidelines and requirements.
- Specifications may be modified without notice due to continuous improvement
| L (line/Active) | Brown or Red cable of mains |
| N (Neutral) | Black or Blue cable of mains |
| D1a | Dry Contact 1 |
| D1b | Dry Contact 1 |
| D2a | Dry Contact 2 |
| D2b | Dry Contact 2 |
| S (Reed Switch) | Switch input (Read only) |
Technical Information
- Max standby power:
<0.7W + or– 3W - Dimensions:
89 x 70 x 26 mm - Accepted Input for L:
100 – 240V~, 50/60Hz - Device is compatible to max current as per below:
Output : 0V - External Switch Voltage Requirements:
L and N input 100–240 V~ - Environment of Installation:
Must be installed indoors or in a weatherproof box. - Compatible wiring size for our connectors:
12AWG – 26AWG. - Factory Reset:
7 consecutive magnet touch with reed switch will reset the hardware. - Use Cases
Garage door, Roller shutter, Swing gates, Sliding Gates, Blinds etc with electric motor
